One charger, four plug standards: the thinking behind ENSTANT’s rotating GaN design

How one GaN charger carries US, EU, UK and AU plugs in a rotating body, why multi-plug safety is hard, and what to ask a supplier before you buy.

The bag of adapters

Open the bag of any frequent traveller and you will find the same thing: a charger, a cable, and a small pile of plug adapters that never quite match the hotel wall. The cause is simple. Plug and socket types are labelled A to O, fifteen in all, and each is used in a different set of countries [1]. The United States uses types A and B, the United Kingdom type G and Australia type I, while Europe uses several types, most commonly C, E and F.

That fragmentation adds cost at every step. A traveller carries extra parts. A distributor stocks a separate variant for each market. An equipment maker writes a separate bill of materials for every destination. The real product problem is not charging. It is the wall.

Why “just add an adapter” is the hard path

Adapters look trivial, but they sit between a mains socket and a device, so the safety margin is thin. In June 2026 the UK Office for Product Safety and Standards recalled a universal travel adaptor after finding that its shutters did not prevent access to live parts, a high risk of electric shock, and that its plug face did not meet the dimensional requirements of BS 1363 [4]. The British Standards Institution had already published BS 8546 in 2016 because no UK standard had been written specifically for testing travel adaptors, and cheap products often had unclear current ratings and poor compatibility with national plug and socket systems [5].

The lesson is not that multi-plug products are unsafe. The lesson is that the plug is a safety-critical part, and a claim of compatibility means nothing without dimensional accuracy, a secure connection and documents that prove both. That is the bar ENSTANT sets for itself: we publish a compliance claim only where a document backs it.

The idea: keep the plugs inside the body

The ENSTANT multi-plug rotating charger puts four plug standards, US, EU, UK and AU, inside one body. Turn the base clockwise and the plugs come out in turn. When you finish, the plug retracts, so nothing sticks out in a bag and nothing is left behind in a hotel room. It is deliberately simple to use.

Building the plugs into the charger also changes the engineering question. Instead of a charger plus an unrelated adapter, with an interface between them that nobody owns, the plug, the housing and the power stage are designed together as one product. The same rotating principle runs through the range: single-plug rotating chargers carry one plug standard (US, EU, UK or AU) and retract it, and the EN-WR family carries four.

FamilyPlug standards in one bodyPower options
EN-WR101 Worldwide RotatingFour: US, EU, UK, AU45W, 60W, 70W, 100W, 140W
EN-SP101 Single-plug RotatingUS, EU, UK or AU, one rotating plug per charger24W to 140W

What a design like this has to get right

Any charger that stores plugs inside its body has to answer a short list of hard questions. They are the same questions a careful buyer should put to every supplier, ENSTANT included.

Why GaN makes the body small enough

A rotating plug mechanism takes space, so the power electronics have to shrink to make room for it. That is where gallium nitride (GaN) helps. GaN transistors switch faster and with lower losses than silicon, so less energy is wasted as heat and fewer bulky supporting parts are needed. The result is a smaller charger for the same output, which is what leaves room for plug heads inside the body. ENSTANT uses GaN across its chargers, from 20W travel adapters to 165W multi-port models.

Fast charging: USB Power Delivery and AVS

Plug compatibility is half the story. The other half is how the charger talks to your device. USB Power Delivery (PD) lets a charger and a device negotiate voltage and current. In the newer USB PD 3.2 revision, the adjustable voltage supply (AVS) is mandatory for sources from 27W to 100W: output adjustable from 9V to 15V for 27W to 45W sources, and from 9V to 20V for 45W to 100W sources, in 100mV steps [2].

This matters for new phones. Apple’s 40W Dynamic Power Adapter, for example, offers AVS output ranges of 9V to 15V and 15V to 20V, and Apple says the iPhone 17 and iPhone 17 Pro Max can reach up to 50% charge in 20 minutes with a 40W or higher adapter and a USB-C cable [6]. A charger that supports AVS can match that kind of negotiation.

ENSTANT designs its GaN stage for USB PD fast charging, including AVS. Support differs by model and power level, so ask Sales for the PD revision and the port-by-port power table of the model you plan to buy before you rely on it for a specific phone or laptop.

Seeing what your charger is doing

On the EN-WS and Slim series, a TFT display shows what the charger is actually doing: charge state, power and temperature. That turns a black box into something you can check at a glance, which is useful at a hotel desk and on a workbench.

Medical power: why documents matter more than adjectives

ENSTANT also offers a separate range of medical power supplies from 24W to 140W. Medical electrical equipment is assessed against IEC 60601-1, the basic safety and essential performance standard, with IEC 60601-1-2 as the collateral standard for electromagnetic compatibility [3]. The third edition describes means of operator protection (MOOP) and means of patient protection (MOPP), and requirements such as isolation voltage and creepage distance depend on the level of protection [3].

The practical advice is the same for any supplier: ask for the certificate and the test report, read the standard, edition and certificate number printed on them, and match them to the equipment you are building. Medical models carry the standard ENSTANT code plus the suffix -M. See also our guide to documents buyers should review.

A ten-point checklist for buying a multi-plug charger

  1. Which plug standards are included, and for which models?
  2. Which certificate covers the model: standard, edition, number, test laboratory?
  3. Is there a dimensional test report for each plug face against its national standard?
  4. Are live parts shielded when a plug is retracted or another plug is in use?
  5. How many rotation cycles has the mechanism been tested for?
  6. Which USB PD revision, and are PPS and AVS supported on which ports?
  7. What is the total output when several ports are used at once?
  8. What is the measured temperature rise at full load?
  9. Are ratings, the engaged plug and warnings marked on the product?
  10. What are the warranty, return and after-sales terms?

Send this list to Sales with the model you are considering.

Who it is for

What we claim, and what we do not

We do not claim that one charger fits every socket in every country. Plug standards, voltages and local rules differ, so tell us the destination country and your equipment, and Sales confirms the right model before you order. That discipline is the reason the rest of this page can be trusted.

Quick answers

How many plug standards does the ENSTANT EN-WR101 carry?

Four plug standards, US, EU, UK and AU, inside one rotating body. Turn the base clockwise and the plugs come out in turn.

Why is GaN used in these chargers?

GaN switches with lower losses than silicon, so less energy is lost as heat and fewer supporting parts are needed. That keeps the body compact enough to carry the plug heads.

Does ENSTANT support USB Power Delivery and AVS?

ENSTANT designs its GaN stage for USB PD fast charging, including AVS. Support differs by model and power level, so ask Sales for the PD revision and per-port power of the model you plan to buy.

What is AVS in USB PD 3.2?

AVS, the adjustable voltage supply, lets a charger vary its output voltage in 100mV steps, from 9V to 15V for 27W to 45W sources and from 9V to 20V for 45W to 100W sources. It is mandatory for 27W to 100W sources in USB PD 3.2.

What should I check on a medical power supply?

Ask for the certificate and test report, and read the standard, edition and certificate number. Medical electrical equipment is normally assessed against IEC 60601-1 and IEC 60601-1-2.

How are medical models named?

Medical models use the standard ENSTANT model code plus the suffix -M, for example EN-SP101-70-EU-B-M. Sales confirms the final code for your order.

Why do travel adapters get recalled?

Recalls typically cite safety defects such as shutters that fail to protect live parts or plug faces that do not meet national dimensional standards, as in a 2026 UK recall.

Does one ENSTANT charger fit every country?

No. ENSTANT does not claim universal compatibility. Tell Sales your destination country and equipment, and they confirm the right model.

References

  1. Plug and socket types A to O. World Standards. https://www.worldstandards.eu/others/plugs/. Lists the 15 lettered plug and socket types (A to O) and where each is used. Accessed 2026-11-02.
  2. Understanding USB Power Delivery 3.2. Power Electronics News. https://www.powerelectronicsnews.com/understanding-usb-power-delivery-3-2. Explains that USB PD 3.2 makes AVS mandatory for 27W to 100W sources, with 9V to 15V and 9V to 20V ranges in 100mV steps. Accessed 2026-11-02.
  3. IEC 60601-1 medical design standards for power supplies. Bel Fuse. https://www.belfuse.com/resource-library/tech-paper/iec-60601-1-medical-design-standards-for-power-supplies. Explains IEC 60601-1, means of operator and patient protection, and the EMC collateral standard IEC 60601-1-2. Accessed 2026-11-02.
  4. Product recall: Universal Travel Adaptor 931E (2601-0268). GOV.UK, Office for Product Safety and Standards. https://www.gov.uk/product-safety-alerts-reports-recalls/product-recall-universal-travel-adaptor-931e-2601-0268. Recall notice citing shutters that do not prevent access to live parts and a plug face that does not meet BS 1363 dimensions. Accessed 2026-11-02.
  5. Raising the safety of travel adaptors with British Standard BS 8546. BSI Group. https://www.bsigroup.com/es-CL/blog/resiliencia-organizacional/Raising-the-safety-of-Travel-Adaptors-with-British-Standard-BS8546. Explains why BSI published BS 8546 in 2016 for the construction, rating, marking, dimensions and testing of travel adaptors. Accessed 2026-11-02.
  6. Apple 40W Dynamic Power Adapter and USB PD 3.2 AVS. ChargerLAB. https://www.chargerlab.com/apple-iphone-17-series-debuts-with-40w-dynamic-power-adapter-and-pd-3-2-avs-fast-charging/. Describes Apple's adapter, its AVS output ranges and Apple's iPhone 17 fast-charging claim. Accessed 2026-11-02.

Originally published by ENSTANT: One charger, four plug standards: the thinking behind ENSTANT’s rotating GaN design.